Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Parts & Supplies Stocking List

Filter Products

Grid
List
Items 1–36 of 1070 total
Adapter Variables
  1. Copper x Copper 6
  2. Fipt x Fipt 1
  3. Fipt x Slip 2
  4. MIPT x FIPT 1
  5. MIPT x Slip 2
  6. Slip 1
  7. Slip x Slip 4
  8. Slip x Slip x FIPT 1
  9. Slip x Slip x Slip 3
  10. Spg x Slip 1
Amps
  1. 0 2
  2. 0.007 1
  3. 0.03-0.3 1
  4. 0.1 5
  5. 0.21 1
  6. 0.3 1
  7. 0.48 1
  8. 0.5 4
  9. 0.65 1
  10. 0.7 3
  11. 1 2
  12. 1.2 3
  13. 1.4 1
  14. 1.5 2
  15. 1.6 2
  16. 1.7 2
  17. 1.8 1
  18. 1.9 2
  19. 11.2 1
  20. 15 1
  21. 18 4
  22. 2 2
  23. 2.2 1
  24. 2.4 2
  25. 2.5 1
  26. 2.6 1
  27. 2.7 1
  28. 2.8 1
  29. 2.9 1
  30. 3 1
  31. 3.5 1
  32. 3.6 1
  33. 3.8 1
  34. 3.9 2
  35. 30 4
  36. 4 1
  37. 4.05 1
  38. 4.4 1
  39. 40 4
  40. 400 4
  41. 5 1
  42. 5.3 2
  43. 6.1 1
  44. 6.6 1
  45. 60 1
  46. 7.3 2
  47. 75 1
  48. 8 6
  49. 9 1
  50. Show more options
Application
  1. 1H/1C Conventional Systems and Heat Pumps 1
  2. 2H/1C or 2C/1H 1
  3. 3H2C HP + 2H2C Conventional Systems 1
  4. 90º flat bends are used to route the SpeediChannel™ around an obstacle. 1
  5. 90º inside elbows are used to route the SpeediChannel™ around an inside corner. 1
  6. 90º long radius flat bends are used to route the SpeediChannel™ around an obstacle. 1
  7. 90º outside elbows are used to route the SpeediChannel™ around an outside corner. 1
  8. A/C System Moisture Removal 1
  9. AC Units 4
  10. ACSR, Screws, Nails, Most Hardened Wire 1
  11. Acts as a superior closure system for use with flexible air ducts and air connectors. Recommended for use on UL list flexible air ducts in accordance with manufacturers' installation instructions. For use in heating, air conditioning, ventilating and refr 2
  12. Adaptor for Tool 1
  13. Air Distribution 29
  14. Air Ventilation 70
  15. An injection system that installs sealants into a leaky referigation unit. 1
  16. Audible Visible 1
  17. Auto, Electrical, Home, Outdoors 1
  18. Automotive, Plumbing, Construction, HVAC, Home Improvement 5
  19. Bi-Directional Liquid Line Filter Drier for heat pumpapplications. Use with CFC, HCFC, HFC refrigerants. 4
  20. Bolt and Nut Applications 1
  21. Bolt Applications 2
  22. Brush, Putty Knife, Caulk Gun or Trowel 3
  23. Caulk Gun 4
  24. Clamp 1
  25. CLOSURE SYSTEM FOR CLASS 1 FLEXIBLE DUCT 1
  26. Commercial and Residental 2
  27. Condensate cleanout device 1
  28. Condensate Drain Pans 1
  29. Condensate removal 1
  30. Condenser Coils 3
  31. Condenser/Evaporator Coils 1
  32. Constant Pressure Regulating (Bypass) Damper 3
  33. Cork tape 1
  34. Coupling fitting for use between like sizes of TracPipe or CounterStrike Tubing. For indoor, outdoor and concealed location applications. 2
  35. Covers line sets, drain lines, and control cables when they can not be installed in a wall. 1
  36. Crimp Insulated and Non-Insulated 10 to 22 AWG Solderless Terminals and Connectors 1
  37. Cut and Trim Sheet Metal 5
  38. Cutting 1
  39. Cutting and Notching Tools 1
  40. Designed For Greater Capacity in Tight Work Spaces 1
  41. Designed for Work with Ties Rated at 120 - 250 lbs. (54.4 - 113 kg) 1
  42. Dual port differential manometer 1
  43. Duct hanging 1
  44. Duct sealing and HVAC contractor use 2
  45. Duct sealing, General Repair 1
  46. Duct Smoke Detection 5
  47. Electrical, Automotive, Aerospace, Construction, Home Improvement 1
  48. Electrical, Automotive, Aerospace, Construction, HVAC, Home Improvement, Outdoors, Security, Agriculture 13
  49. Electrical, Automotive, Aerospace, Home Improvement, Construction 30
  50. Evaporator Coils 1
  51. Fan Cycling 3
  52. Finding Gas Leaks - to 5*F 1
  53. Flexible Ducting 1
  54. Folding sheetmetal 1
  55. For anchoring in wallboard or masonry 1
  56. For Work in Close Quarters 1
  57. Furnace Filter 8
  58. Gas Piping Applications 5
  59. Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity 1
  60. GE, HP, Dual Fuel 3
  61. General Purpose 5
  62. General repair, seaming poly sheeting 2
  63. Hand Cleaners 1
  64. Heat Pump Systems 1
  65. Heat Pumps 2
  66. Heat Pumps with auxiliary heat 1
  67. Heat Sink 1
  68. Heat/Cool or Heat Pump with Auxiliary Heat 4
  69. Heat/Cool or Heat Pump without Auxiliary Heat 1
  70. Heating Duct 1
  71. Heavy duty construction 1
  72. High Pressure 2
  73. HVAC 40
  74. HVAC / Refrigeration 1
  75. HVAC / Refrigeration 5
  76. HVAC, Construction, Home Improvement 6
  77. HVAC/R 2
  78. HVAC/R Refrigeration 2
  79. HVAC/R, All Systems up to 6 Tons 1
  80. Ideal for outdoor applications where the SpeediChannel™ runs up an exterior wall and enters the house vertically through the soffit. 1
  81. Ideal for pairing with Malco Zip-In and Bit-Tip Screws. 1
  82. Impact Grade Steel Construction 2
  83. Indoor Evaporator Coil Cleaning 2
  84. Indoor/Outdoor Coil Cleaning 1
  85. Indoor/outdoor sealing of HVAC systems 2
  86. Installation of Piping 13
  87. Joints and seams in HVAC systems, general industrial 2
  88. Leak Sealant 1
  89. Lightweight Concrete Equipment Pads 7
  90. Liquid Linetype 4
  91. Liquid tight flexible conduit system. A labor saving convenience kit for A/C unit hookup. Also use for heat pumps, refrigeration, hot tubs, swimming pools and outdoor lighting. 2
  92. Low Pressure 2
  93. Low-Medium-High temperature systems 1
  94. Lubricant 2
  95. Magnetic Hex Driver 4
  96. Manual Reset 1
  97. Measuring evacuation levels 1
  98. Metal cutting 6
  99. Nitrogen Purging Regulator 1
  100. NOVENT® Multi-key unlocks R-22 , R410 and universal caps. 1
  101. Pancake Coils 7
  102. Plastic Equipment Pad 4
  103. Pressure Regulation 1
  104. Pressure Testing 1
  105. PVC and CPVC applications 1
  106. PVC Cement 1
  107. Ratcheting Refrigeration Wrench 1
  108. Recommended for use on UL listed fiberglass duct board in accordance with manufacturers' installation instructions. Meets UL 181 A-P standard for use as a closure material on fiberglass duct systems and UL-181 B-FX standard for use on flexible air ducts a 1
  109. Refrigerant Leak Detection 1
  110. Refrigerant Pressure Testing 7
  111. Refrigeration wrench 1
  112. Removes solid contaminants and harmful acids that arecreated during motor burnout. The suction line filter driershould be installed in Remote systems with long refrigerantlines to remove contaminants. 7
  113. Residential 5
  114. Seal and patch FSK duct boards and blankets. 1
  115. Seal duct work for heating, air conditioning and refrigeration systems. Sealing, patching and securing insulation materials. General purpose patch and repair. 1
  116. Seal flexible duct systems. Seal fiberglass insulation board. Hold insulation materials in place. General contractor uses including bundling, sealing, and patching. 1
  117. Seals standard Schrader service valves on all central A/C units and mini-splits to help prevent refrigerant leakage, Protects from serious injury or death resulting from the inhalation of dangerous gases 1
  118. Service Hose 2
  119. Service Tool 1
  120. Service Wrench 2
  121. Sheet Metal 2
  122. SHEETING AND GEN'L PURPOSE REPAIR 1
  123. SHEETING, GENERAL PURPOSE 1
  124. Shuts off the system when water rises due to a clogged air conditioning condensate drain. 3
  125. Snaplock Pipe 11
  126. Standard Efficient Gas Forced Air, High Efficacy Gas Forced Air, Oil Forced Air, Electric Forced Air, Hot water Fan Coil, Geothermal Heat Pump, Air to Air Heat 3
  127. Standard Efficient Gas Forced Air, High Efficacy Gas Forced Air, Oil Forced Air, Electric Forced Air, Hot water Fan Coil, Geothermal Heat Pump, Air to Air Heat Pump, Hot Water Radiant Heat, Steam 1
  128. Standard Long-Nose Pliers - Side Cutting 1
  129. Storm Collar 3
  130. SUPERIOR CLOSURE SYSTEM FOR CLASS 1 FLEXIBLE DUCTS AND AIR CONNECTORS 1
  131. Supports condensing units 1
  132. System Flush is a flushing solvent for air conditioning and refrigeration systems, and is formulated for R-410A retrofits, refrigerant conversions and compressor burnouts. 2
  133. TAPE JOINTS/SEAMS IN DUCT WORK FOR AC 1
  134. Termination fitting between TracPipe or CounterStrike Tubing and NPT thread. Fitting thread is Male NPT. For use indoor, outdoor, and concealed location applications. 4
  135. The duct end is used to termite a run of SpeediChannel™ 1
  136. The SpeediChannel™ Fitting Kit provides a simple mix of the basic fittings used in a typical SpeediChannel™ installation job. 1
  137. The wall sleeve creates a neat hole through the wall, and the line set is covered by the wall cover. 1
  138. Thermostat 7
  139. Thinner walled trap for light duty applications. 1
  140. Transition fitting between TracPipe or CounterStrike Tubing and NPT thread. Fitting thread is Female NPT. For use indoor, outdoor, and concealed location applications. 1
  141. Transition fitting between TracPipe or CounterStrike Tubing and NPT thread. Fitting thread is Male NPT. For use indoor, outdoor, and concealed location applications. 4
  142. Trap can be used for most applications requiring a automatic shut down. Includes a standard clear u-bend for inspection and access ports for easy cleaning. 1
  143. Tube Cutting 4
  144. Tube Cutting and Reaming 1
  145. Type B Gas Vent Systems 25
  146. Up to 1 Heat/1 Cool Conventional Systems and Heat Pumps with No Auxiliary Heat 1
  147. Up to 4Heat/3 Cool Conventional Systems 1
  148. Used for anchoring in solid masonry, block, or brick 1
  149. Used for joining two pieces of the same sized SpeediChannel™ 1
  150. Used in drywall 1
  151. Used to cap the end of a SpeediChannel™ run. 1
  152. Various 1
  153. Water 1
  154. Weight Measurement 1
  155. Welding Heating Brazing Soldering 1
  156. When installed the NOVENT® outer casing will rotate around the thread insert, not allowing cap to be removed. Torque limiter prevents over tightening. Embossed ID labeling prevents refrigerant gas mixing. Grasp cap, insert key and turn clockwise until 3
  157. Whole House 1
  158. Wrap and protech foam insulation on outdoor linesets 1
  159. Yes (Computer and Smart Phone Portal App) 1
  160. Zone Damper 6
  161. Zoning 3
  162. Show more options
Brand
  1. ALL-ACCESS® 1
  2. Aquaguard® 3
  3. Armacell 13
  4. ATCO 1
  5. Baldor-Reliance 4
  6. Berry 2
  7. BMP 1
  8. Cliplight 1
  9. Ditek 1
  10. DiversiTech 29
  11. Duracell® 5
  12. ecobee 2
  13. Fieldpiece® 20
  14. Freon™ 1
  15. GENESIS 7
  16. Google Nest 2
  17. Hailiang 7
  18. Hardcast/Carlisle 7
  19. Hart & Cooley 29
  20. Honeywell 7
  21. Honeywell Home 26
  22. Intermatic 1
  23. JMF 8
  24. JP Lamborn 1
  25. K-Flex 5
  26. Kidde 2
  27. Klein Tools® 35
  28. Lift Safety 18
  29. Little Giant 2
  30. Malco 83
  31. McDaniel Metals 2
  32. Miami Tech 2
  33. Nashua® 1
  34. Novent® 4
  35. Nu-Calgon 12
  36. Oatey 2
  37. Omega Flex 25
  38. Polyken® 18
  39. Rectorseal® 3
  40. RGF 8
  41. Southwark 186
  42. SpeediChannel™ 11
  43. SYSTEM SENSOR 7
  44. Thermaflex 34
  45. TopTech 48
  46. Totaline 85
  47. TRADEPRO® 201
  48. Truaire 70
  49. Varies 2
  50. VIVE 9
  51. Watchdog 3
  52. Western Enterprises 1
  53. ZONEFIRST 12
  54. Show more options
Built In Wi-Fi
  1. Yes 9
  2. No 26
Capacitor MFD µF
  1. 10 13
  2. 10/10 1
  3. 10/440 4
  4. 12.5 1
  5. 130-156 1
  6. 15 5
  7. 15/440 2
  8. 20 1
  9. 20/5 1
  10. 200 2
  11. 25/5 2
  12. 25/7.5 1
  13. 3 1
  14. 30/15 1
  15. 30/3 1
  16. 30/5 2
  17. 30/7.5 2
  18. 35/10 1
  19. 35/15 1
  20. 35/3 1
  21. 35/5 2
  22. 35/7.5 1
  23. 4 1
  24. 40/10 1
  25. 40/3 1
  26. 40/5 2
  27. 40/7.5 2
  28. 400 2
  29. 43-53 1
  30. 45/10 1
  31. 45/5 1
  32. 45/7.5 2
  33. 5 1
  34. 5/370 6
  35. 50/10 1
  36. 50/5 1
  37. 50/7.5 2
  38. 55/10 1
  39. 55/15 1
  40. 55/4 1
  41. 55/5 1
  42. 55/7.5 1
  43. 60/10 1
  44. 60/5 1
  45. 60/7.5 1
  46. 65/7.5 1
  47. 7.5 1
  48. 7.5/370 1
  49. 7.5/440 1
  50. 70/10 1
  51. 70/5 1
  52. 70/7.5 1
  53. 80/10 1
  54. 80/5 1
  55. 80/7.5 1
  56. Show more options
CFM
  1. 1000-6500 1
  2. 2400 1
Coil Length
  1. 250' 5
  2. 30' 3
  3. 50' 12
  4. 500' 2
Color
  1. Arctic White 4
  2. Beige 2
  3. Black 76
  4. Black Silver, White 1
  5. Black, Blue 4
  6. Black, Blue, Brass, Green, Red, White 1
  7. Black, Blue, Brass, Red, White 1
  8. Black, Blue, Gray, Natural, Orange, Red, Yellow 1
  9. Black, Chrome, Orange 1
  10. Black, Copper 5
  11. Black, Gray 6
  12. Black, Gray, Red 1
  13. Black, Gray, White 1
  14. Black, Gray, Yellow 1
  15. Black, Green, Red, Purple 4
  16. Black, Orange, Silver 1
  17. Black, Red 1
  18. Black, Silver 6
  19. Black, Silver, Yellow 2
  20. Black, White 2
  21. Black, Yellow 2
  22. Blue 29
  23. Blue, Clear, Silver 1
  24. Blue, Gold 2
  25. Blue, Red, Yellow 1
  26. Brass 1
  27. Brown 23
  28. Brown, Silver 1
  29. Camouflage 1
  30. Chrome 1
  31. Chrome, Silver 1
  32. Clear 12
  33. Clear, Gray, Black 1
  34. Copper 12
  35. Dark gray 2
  36. Gold 1
  37. Gold, Red 1
  38. Gold, Yellow 3
  39. Gray 52
  40. Gray, Tan 3
  41. Gray, Wood Grain 1
  42. Gray, Yellow 1
  43. Green 7
  44. Green, White 1
  45. Ivory 11
  46. Metallic 9
  47. Natural 10
  48. Natural Wood 1
  49. Orange 5
  50. Orange, Silver 1
  51. Pink, Silver 29
  52. Premier White® 4
  53. Purpal 1
  54. Red 15
  55. Red, Silver 1
  56. Red, White 2
  57. Silver 253
  58. Turquoise 3
  59. Various 4
  60. White 137
  61. Yellow 28
  62. Show more options
Composition
  1. 100% Cotton 2
  2. 100% Cotton - Lint Free 1
  3. 22-gauge galvanized steel 1
  4. 5-1/2in. Motor Mount Torsion Flex Bracket 1
  5. 5-Pack Utility Knife Blades 1
  6. 75% molecular sieve and 25% activatedalumina blocks. 4
  7. Aluminum 56
  8. Aluminum & Steel 13
  9. Aluminum, Non PCB 2
  10. Aluminum, Steel 4
  11. Bi-Metal 2
  12. Brass 6
  13. Closed Cell Flexible Elastomeric Foam Insulation 5
  14. Copper 8
  15. Copper & Insulation 7
  16. Copper and Brass 4
  17. Cork Insulation Tape is a polymer-based material containing butyl rubber, asphalt, and granulated cork (55% by volume). It contains no fibers. 1
  18. Corrosion-resistant 304 stainless steel 3
  19. Desiccant Blend: Activated Alumina withmolecular sieve 4
  20. Durable hardwood handle with all natural bristle 1
  21. Engineered Polymer 3
  22. Fiber-cement over encapsulated polystyrene 7
  23. Fiberglass 29
  24. Flame Retardant Thermoplastic Shell with Zinc-Plated Square-Wire Spring 6
  25. FOIL AND ACRYLIC 2
  26. FOIL AND BUTYL RUBBER 2
  27. Foil backing, acrylic adhesive, paper release liner. 1
  28. Foil backing, synthetic rubber adhesive, paper release liner. 1
  29. FOIL WITH SYNTHETIC RUBBER 1
  30. Foil, Skrim, Paper Release Liner 1
  31. Forged Steel 1
  32. Forged Steel, with Leather Grip 2
  33. Galvanized Steel 194
  34. High Grade Brass 3
  35. Induction Hardened Steel 1
  36. Ingredients not idenified are proprietary or non-hazardous by GHS criteria. 1
  37. Lightweight magnesium handles/high-carbon steel blades 1
  38. Limonene, C12-15 pareth-11, diethylhexl sodium sulfosuccinate, dimethyladipate 1
  39. Low Carbon Steel Screw/Plastic Anchor 1
  40. Magnetic Aluminum 1
  41. MARD9 1
  42. Metal 7
  43. Metal, Plastic 1
  44. Metallized coated cloth backing, rubber adhesive 1
  45. Metallized Polyester 1
  46. Micro-Foam 1
  47. Natural Gas 2
  48. Nitrile 2
  49. Nitrile/PVC 13
  50. Nut, Adapter, and Snap Ring: Yellow Brass 2
  51. Nut, Adapter, and Split Rings: Yellow Brass, Insert and 1" Split Rings: Stainless Steel 6
  52. Nut, Adapter, and Split Rings: Yellow Brass, Insert: Stainless Steel, Mounting Bracket: Galvanized Steel 2
  53. Nut, Adapter, Flange and Split Rings: Yellow Brass, Insert and 1" Split Ring: Stainless Steel 2
  54. Nylon 2
  55. Nylon 6,6 11
  56. Nylon, Rubber, Braid 5
  57. OPP FILM AND ACRYLIC ADHESIVE 1
  58. OPP FILM WITH ACRYLIC ADHESIVE 1
  59. PCB Board, Plastic Case 2
  60. PE COATED CLOTH 4
  61. PE COATED CLOTH AND RUBBER ADHESIVE 1
  62. PE Coated Cloth backing, rubber adhesive 2
  63. PE COATED CLOTH WITH RUBBER ADHESIVE 3
  64. Pentafluoroethane (HFC-125) 45%, 1,1,1,2-Tetrafluoroethane (HFC-134a) 44.2% 1
  65. Plastic 4
  66. Polyester 1
  67. Polyester Film, Wire, & Insulation 1
  68. Polypropylene 5
  69. Polyurethane high abrasion resistant base 1
  70. Polyvinyl Chloride 21
  71. Polyvinyl Chloride (PVC) 2
  72. Propane, butane, ethanol 1
  73. PVC 4
  74. PVC/Stainless Steel 1
  75. Sheet Metal 1
  76. Silicone Rubber 4
  77. Spandex Fabric with Padded Palms 6
  78. Stainless Steel, Zinc 1
  79. StarYarn™ premium engineered yarn shell High-Density Polyethylene (HDPE) & Polyester with BLACK Crinkle Grip Latex Palm Dip 2
  80. Steel 139
  81. Steel Blade 2
  82. Steel with Ergonomic Cushioned Handles 1
  83. Steel with Green Thermoplastic grip 1
  84. Steel with Red Thermoplastic grip 2
  85. Steel, aluminum 1
  86. Synthetic Latex 3
  87. Synthetic Leather 3
  88. U.V. inhibited virgin resin 11
  89. Unique Molded Desiccant Block 6
  90. Urea, Benzyl C12-18 Alkyldimethyl Ammonium Chlorides 1
  91. Vinyl 1
  92. Yellow Brass, Stainless Steel 1
  93. Zinc Plated 9
  94. Show more options
Copper Tube Size (OD)
  1. 1 1/8" 1
  2. 1 5/8" 1
  3. 1-1/8" 3
  4. 1-3/8" 1
  5. 1/2" 1
  6. 3/4" 3
  7. 3/8" 2
  8. 5/8" 2
  9. 7/8" 4
Diameter
  1. 0.250" 2
  2. 0.375" 1
  3. 0.500" 1
  4. 0.625" 1
  5. 0.750" 2
  6. 0.875" 11
  7. 1 1/8" 4
  8. 1 1/8" x 1 1/8" x 1 1/8" 1
  9. 1 3/8" 3
  10. 1 5/8" 1
  11. 1.125" 1
  12. 1/2" 3
  13. 10" 8
  14. 12" 6
  15. 14" 6
  16. 16" 8
  17. 18" 4
  18. 2 x 2.056 2
  19. 2" 18
  20. 2.07" 10
  21. 2.16" 4
  22. 2.3" 2
  23. 2.4" 3
  24. 2.46" 13
  25. 2.5" 3
  26. 2.58" 1
  27. 2.91" 1
  28. 20" 1
  29. 3" 10
  30. 3" x 2" 1
  31. 3.64" 1
  32. 3/4" 9
  33. 3/8" 2
  34. 4" 14
  35. 5" 10
  36. 6" 16
  37. 7" 12
  38. 8" 13
  39. 9" 2
  40. 9.7 mm 1
  41. Diameter across flats - 1 1/8", Flange Diameter - 3 1/4" 1
  42. Diameter across flats - 1 3/8", Flange Diameter - 3 7/16" 1
  43. Various 1
  44. Show more options
Digital
  1. Yes 11
Finish
  1. Aluminum 2
  2. Aluminum/Steel 1
  3. Black 1
  4. Black Phosphate 1
  5. Black Polyester 1
  6. Blue Stalgard Coating 1
  7. chrome 2
  8. Chrome Cast 1
  9. Chrome Plated 1
  10. Chrome-Plated 3
  11. Combination Polished Black Oxide 1
  12. Forged Steel, with Leather Grip 2
  13. Gold 1
  14. Hardened Steel 7
  15. Heat Treat 9
  16. Heat treated 5
  17. Nickel Plated 1
  18. None 9
  19. Painted 5
  20. Polished 4
  21. Powder Coated 75
  22. Stainless Steel 1
  23. Steel 24
  24. Steel Blade 2
  25. Steel with Ergonomic Cushioned Handles 1
  26. Steel with Green Thermoplastic grip 1
  27. Steel with Red Thermoplastic grip 2
  28. Tempered Steel 1
  29. Zinc Plated Screws/Plastic Anchor 1
  30. Show more options
Fitting Type
  1. 45° Elbow 3
  2. 90° Elbow 4
  3. 90° Long Radius 1
  4. 90° Street Elbow 2
  5. Adapter 2
  6. Cap 2
  7. Coupling 6
  8. Female x Slip Coupling 1
  9. Tee 6
Flow Rate
  1. 17gallons/day 1
  2. 3 gal/hr 1
  3. 6 gal/hr 1
Fuel Type
  1. Acetylene 1
  2. Natural Gas or LP 2
  3. Nitrogen 1
Functions
  1. 90º Flat Bends are Used to Route the SpeediChannel™ Around an Obstacle 1
  2. 90º Inside Elbows are Used to Route the SpeediChannel™ Around an Inside Corner 1
  3. 90º Long Radius Flat Bends are Used to Route the SpeediChannel™ Around an Obstacle 1
  4. 90º Outside Elbows are Used to Route the SpeediChannel™ Around an Outside Corner 1
  5. Aerosol version - Ready-to-use, no rinse cleaner and disinfectant for evaporator coils. 1
  6. An Injection System That Installs Sealants Into a Leaky Referigation Unit 1
  7. Clean line sets in preparation of changing from R-22 to R-410A (mineral oil to POE oil) as well as to flush the contaminants from a system after a compressor burn out. 2
  8. Clear Condensate Cleanable Trap 1
  9. Clear Condensate Trap with Switch 1
  10. Coil Cleaner 2
  11. Compressor Lubricant 2
  12. Condensate Cleanout Device 1
  13. Condensate Drain Pan Cleaner/Treatment 1
  14. Covers Line Sets, Drain Lines, and Control Cables When They Can Not Be Installed in a Wall 1
  15. Duct Sealant 3
  16. Electrical Tape 1
  17. Eliminates moisture in a system, Prevents acid formation 1
  18. Gas connector 3
  19. Gas Connector with Valve 2
  20. Gas Leak Detector 1
  21. Hand Cleaning Scrubbing towels 1
  22. Heat sink 1
  23. Ideal for Outdoor Applications Where the SpeediChannel™ Runs Up an Exterior Wall and Enters the House Vertically Through the Soffit 1
  24. Indoor Coil Cleaner 1
  25. Leak Sealant, UV dye injector 1
  26. Lubricant 1
  27. Most Effective Coil Cleaner Available. Foams, Brightens and Safer Than HF Acid 2
  28. PVC Cement 1
  29. Sealant 20
  30. Sealings 1
  31. Shuts Off the System When Water Rises Due to a Clogged Air Conditioning Condensate Drain 3
  32. Silicone Sealant 4
  33. Stops leaks permanently 1
  34. The duct end is used to termite a run of SpeediChannel™ 1
  35. The SpeediChannel™ Fitting Kit Provides a Simple Mix of the Basic Fittings Used in a Typical SpeediChannel™ Installation Job 1
  36. The Wall Sleeve Creates a Neat Hole Through the Wall, and the Line Set is Covered by the Wall Cover 1
  37. Thermal Insulation 5
  38. Torsion Flex Bracket holds motor securely. 1
  39. Used for joining two pieces of the same sized SpeediChannel™ 1
  40. Used to Cap the End of a SpeediChannel™ Run 1
  41. Show more options
Insulation Nominal I.D.
  1. 1 1/8" 3
  2. 1 3/8" 1
  3. 1-1/8" 1
  4. 1-5/8" 1
  5. 1/2" 2
  6. 3/4" 3
  7. 3/8" 2
  8. 5/8" 1
  9. 7/8" 4
Insulation Thickness Suction Line
  1. 1/2" 7
Iron Pipe Nominal Size
  1. 0.75 1
  2. 1 1/4" 1
  3. 1" 1
  4. 1/2" 5
  5. 1/4" 1
  6. 1/8" 2
  7. 3/4" 3
  8. 3/8" 1
Jacket Material
  1. 2 Ply Reinforced Metalized Polyester 1
  2. Fiberglass Scrim Reinforced Metalized Polyester 1
  3. Fiberglass-Reinforced, Metallized Film Vapor Barrier 5
  4. Laminated Polyester Film 27
  5. Polyvinyl Chloride (PVC) 7
  6. Scrim Reinforced Grey Polyester 2
Media Type
  1. Synthetic 8
MERV Rating
  1. 11 11
  2. 15 3
Motor HP
  1. 1 1/2 HP 1
  2. 1 HP 2
  3. 1/2 HP 7
  4. 1/3 HP 6
  5. 1/30 HP 2
  6. 1/4 HP 5
  7. 1/5 HP - 1/2 HP 2
  8. 1/6 HP 3
  9. 1/6 HP - 1/2 HP 3
  10. 1/6 HP - 1/3 HP 2
  11. 2 HP 1
  12. 3/4 HP 5
  13. 5 HP 1
  14. Show more options
Motor Type
  1. PSC (Permanent Split Capacitor) 31
Number of HVAC Zones
  1. 1 11
  2. 2 2
  3. 3 2
  4. 4 1
Number of Speeds
  1. 1 (Single) 20
  2. 2 (Two) 2
  3. 3 (Three) 9
  4. 4 (Four) 4
Phase
  1. Direct 4
  2. Single 85
  3. Three 5
Product Family
  1. 102 7
  2. 103 3
  3. 1120DBS 1
  4. 1140R 1
  5. 132M 3
  6. 150M 7
  7. 150TS 2
  8. 154R 2
  9. 170 7
  10. 190 20
  11. 2003CD 2
  12. 2004CD 5
  13. 3RP 7
  14. 4010FG 1
  15. 4DFC 1
  16. 800 2
  17. 801 2
  18. 802 3
  19. A210VM 2
  20. Show more options
Refrigerant
  1. CFC & HCFC 4
  2. CFC, HCFC, HFC 4
  3. HCFCs, & CFCs 3
  4. R-22 4
  5. R-438a 1
  6. R-502 1
RPM
  1. 1075 27
  2. 1750 1
  3. 1755 1
  4. 1760 2
  5. 825 4
R-Value
  1. Not Insulated 42
  2. R2 1
  3. R2.2 2
  4. R2.3 1
  5. R3 2
  6. R3.1 3
  7. R3.2 1
  8. R3.3 1
  9. R3.6 1
  10. R4.2 11
  11. R4.8 1
  12. R4.9 1
  13. R5 1
  14. R6 9
  15. R6.4 1
  16. R6.7 1
  17. R7.5 1
  18. R8 18
  19. Show more options
Size
  1. #10 x 1/2" 1
  2. #10 x 3/4" 1
  3. #8 x 1 1/2" 1
  4. #8 x 1" 1
  5. #8 x 1/2" 1
  6. #8 x 2" 2
  7. #8 x 3/4" 1
  8. 0.3oz 1
  9. 0.5 lb. 1
  10. 1 1/2 - 5 Tons 1
  11. 1 1/2" 1
  12. 1 1/2'' 1
  13. 1 1/4" x 2 1/2" 1
  14. 1 1/8" x 50' 1
  15. 1 bottle (200 tablets) 1
  16. 1 gal. 3
  17. 1 Gallon 5
  18. 1 lb. 1
  19. 1 qt. 1
  20. 1 Quart 2
  21. 1.1" 2
  22. 1.88" 1
  23. 1.88" x 150' 1
  24. 1.88" x 180' 8
  25. 1/2" 3
  26. 1/2" x 50' 1
  27. 1/2" X 6' 1
  28. 1/4" 16
  29. 1/4" x 1 1/4" 1
  30. 1/4" x 50' 1
  31. 1/4", 3/16", 3/8", 5/16" 2
  32. 1/8" 2
  33. 10 1/8'' 1
  34. 10 Pound 1
  35. 10" 15
  36. 10" Diameter 1
  37. 10" x 10" 1
  38. 10" x 10" x 10" 1
  39. 10" x 12" 1
  40. 10" x 25' 3
  41. 10" x 4" 3
  42. 10" x 6" 4
  43. 10" x 60"  1
  44. 10" x 8" 2
  45. 10" x 8" x 8" 1
  46. 10-16 x 1 1
  47. 10-16 x 1/2 1
  48. 10-16 x 3/4 2
  49. 10.1 Ounces 4
  50. 11 Ounce 2
  51. 11" 2
  52. 11" x 12 7/16" x 14" 1
  53. 11" x 15 3/4" x 14" 1
  54. 11" x 19 1/4" to 18" Round 1
  55. 12 Ounce 1
  56. 12" 14
  57. 12" Diameter 1
  58. 12" x 10" 2
  59. 12" x 12" 2
  60. 12" x 20" 1
  61. 12" x 25' 4
  62. 12" x 4" 1
  63. 12" x 6" 4
  64. 12" x 60" 1
  65. 12" x 8" 1
  66. 12-Piece SAE 1
  67. 120" 2
  68. 13" x 20" x 14" 1
  69. 13" x 20" x 16" 1
  70. 13.5" x 10" x 11.42 1
  71. 14 1
  72. 14 OZ 1
  73. 14 Oz. 1
  74. 14" 14
  75. 14" Diameter 1
  76. 14" x 25' 4
  77. 14" x 10" 2
  78. 14" x 10" x 10" 1
  79. 14" x 12" 1
  80. 14" x 12" x 12" 1
  81. 14" x 14" 2
  82. 14" x 14" x 14" 3
  83. 14" x 16" to 20" Round 1
  84. 14" x 16" x 16" 1
  85. 14" x 16" x 18" 1
  86. 14" x 20" 2
  87. 14" x 20" x 16" 1
  88. 14" x 24" 1
  89. 14" x 25" 1
  90. 14" x 25" x 4" 2
  91. 14" x 4" 1
  92. 14" x 6" 1
  93. 14" x 60" 1
  94. 14" x 8" 1
  95. 15.47" x 12" x 13.18 1
  96. 16 Ounces 2
  97. 16 oz. 1
  98. 16" 10
  99. 16" Diameter 1
  100. 16" x 14" 1
  101. 16" x 14" x 14" 1
  102. 16" x 16" 1
  103. 16" x 19" 1
  104. 16" x 20" 2
  105. 16" x 20" to 16" Round 1
  106. 16" x 20" x 14" 1
  107. 16" x 20" x 4" 2
  108. 16" x 22" 1
  109. 16" x 25" 2
  110. 16" x 25" x 4" 3
  111. 16" x 25' 3
  112. 16" x 48" 1
  113. 17" x 22" x 4" 1
  114. 17.36" x 14" x 14.96 1
  115. 18 Ounce 3
  116. 18 oz. 1
  117. 18" 5
  118. 18" x 16" 1
  119. 18" x 25' 3
  120. 18" x 48" 1
  121. 2 1/4" x 10" x 5" 1
  122. 2 7/16" 1
  123. 2 Gallon 1
  124. 2" 5
  125. 2" x 10" 2
  126. 2" x 12" 1
  127. 2" x 4.5" 1
  128. 2-Piece 1
  129. 2.5 Gallon 1
  130. 2.82" x 150' 4
  131. 2.82" x 180' 4
  132. 2.82" x 360' 1
  133. 20" x 14" 2
  134. 20" x 20" 3
  135. 20" x 20" to 16" Round 1
  136. 20" x 20" x 14" 1
  137. 20" x 20" x 18" 1
  138. 20" x 20" x 4" 3
  139. 20" x 25" 2
  140. 20" x 25" x 4" 2
  141. 20" x 25' 1
  142. 20" x 30" 1
  143. 200 count 1
  144. 21" 1
  145. 24" 3
  146. 24" x 20" x 14" 1
  147. 24" x 24" 11
  148. 24" x 30" 1
  149. 24" x 36" 1
  150. 25 Pound 1
  151. 25" x 20" 1
  152. 25" x 22" x 4" 1
  153. 28" x 32" 1
  154. 28" x 40" 1
  155. 3 1/2" x 2 3/4" 1
  156. 3 lb. 1
  157. 3 oz. pressurized can 1
  158. 3" 13
  159. 3" x 100' 2
  160. 3" x 12" 1
  161. 3" x 18" 1
  162. 3" x 2" 1
  163. 3" x 24" 1
  164. 3" x 3" 1
  165. 3" x 4" 1
  166. 3" x 5" 1
  167. 3" x 60" 1
  168. 3/16-Inch and 1/4-Inch Slotted, #1 and #2 Phillips, 1/4-Inch and 5/16-Inch Nut Drivers 1
  169. 3/4" 18
  170. 3/4" x 50' 1
  171. 3/4" X 6' 1
  172. 3/4" x 66' x 0.007" 1
  173. 3/8" 5
  174. 3/8" x 1 1/8" 1
  175. 3/8" x 100' 1
  176. 3/8" x 3/4" x 1/2" 2
  177. 3/8" x 5/8" 2
  178. 3/8" x 50' 1
  179. 3/8" x 7/8" 2
  180. 30 Pound 1
  181. 30" x 20" 1
  182. 30" x 24" 1
  183. 30" x 30" 1
  184. 30" x 30" x 3" 2
  185. 30" x 50" 1
  186. 30" x 50" x 4" 1
  187. 30" x 60" 1
  188. 30" x 62" 1
  189. 30" x 70" 1
  190. 30' x 2" 1
  191. 300' x 1.75" 1
  192. 32 Ounce 1
  193. 32" x 32" 1
  194. 32" x 32" x 3" 2
  195. 32" x 72" 1
  196. 34" x 79" 1
  197. 36" 1
  198. 36" x 36" x 3" 1
  199. 36" x 42" x 3" 1
  200. 36" x 48" x 3" 1
  201. 36" x 50" x 3" 1
  202. 36" x 60" x 3" 1
  203. 4" 12
  204. 4" x 10" 3
  205. 4" x 10" x 4" 3
  206. 4" x 10" x 5" 2
  207. 4" x 10" x 6" 3
  208. 4" x 10" x 7" 2
  209. 4" x 12" 5
  210. 4" x 12" x 6" 3
  211. 4" x 12" x 7" 2
  212. 4" x 12" x 8" 2
  213. 4" x 14" 1
  214. 4" x 18" 1
  215. 4" x 24" 1
  216. 4" x 25' 1
  217. 4" x 3" 2
  218. 4" x 4" 1
  219. 4" x 4" x 4" 1
  220. 4" x 48" 1
  221. 4" x 5" 1
  222. 4" x 60" 1
  223. 4" x 8" 1
  224. 4" x 8" x 5" 1
  225. 4.13" x 2.95" 1
  226. 4.33" x 4.33" x 4.14" 2
  227. 4.34" x 3.16" x 9.84" 1
  228. 4.34" x 4.14" x 3.16" 1
  229. 4.72" x 4.14" with 1.96" Small Opening 1
  230. 45" x 50" x 3" 1
  231. 48" 1
  232. 5 1/2" 1
  233. 5" 7
  234. 5" x 25' 4
  235. 5" x 4" 1
  236. 5" x 60" 1
  237. 5.7" x 4.14" x 7.48" 1
  238. 5.9" x 5.9" x 4.14" 1
  239. 5/16" 6
  240. 5/16" x 50' 1
  241. 5/8" 3
  242. 5/8" x 50' 1
  243. 50" x 56" x 3" 1
  244. 6 3/4'' 1
  245. 6" 23
  246. 6" Diameter 1
  247. 6" x 1 5/8" 1
  248. 6" x 10" 1
  249. 6" x 10" x 6" 1
  250. 6" x 10" x 7" 1
  251. 6" x 10" x 8" 1
  252. 6" x 12" 1
  253. 6" x 12" x 6" 1
  254. 6" x 12" x 8" 2
  255. 6" x 25' 4
  256. 6" x 4" 1
  257. 6" x 4" x 4" 1
  258. 6" x 5" 1
  259. 6" x 6" x 6" 2
  260. 6" x 60" 1
  261. 6-13/16-Inch 1
  262. 6-3/8'' 1
  263. 6.5' x 4" 1
  264. 60" 2
  265. 7 x 1/2 1
  266. 7" 11
  267. 7" x 25' 4
  268. 7" x 6" 1
  269. 7" x 60" 1
  270. 7/16" 1
  271. 7/8" x 50' 1
  272. 75 count 1
  273. 8 1/16'' 1
  274. 8 1/2" 1
  275. 8 Ounce 2
  276. 8" 15
  277. 8" Diameter 1
  278. 8" x 1" 1
  279. 8" x 25' 4
  280. 8" x 4" 1
  281. 8" x 6" 1
  282. 8" x 6" x 6" 1
  283. 8" x 60" 1
  284. 8" x 7" 1
  285. 8-18 x 3/4 1
  286. 9 1/2" x 9 3/4" 1
  287. 9 Volt 1
  288. 9" 3
  289. 9" x 25' 1
  290. 9" x 7" x 7" 1
  291. AA 1
  292. AAA 1
  293. Assorted Sizes 1
  294. C-Cell 1
  295. D-Cell 1
  296. For 1.5 - 5 Ton units 1
  297. For 3/8-16 Rod 2
  298. Large 5
  299. Single pack 1
  300. Varies 2
  301. X-Large 6
  302. XX-Large 3
  303. Show more options
Stage
  1. Single 3
Stages Cool
  1. 1 13
  2. 2 23
  3. 3 1
Stages Heat
  1. 1 7
  2. 2 18
  3. 3 9
  4. 4 3
Thickness
  1. 0.177 mm 1
  2. 1/8" 1
  3. 10 Mils 3
  4. 11 Mils 5
  5. 14 Mils 3
  6. 17 Mils 2
  7. 3 Mils 1
  8. 3.10 Mils 1
  9. 3.50 Mils 2
  10. 3.70 Mils 2
  11. 4" 8
  12. 4.80 Mils 1
  13. 8 Mils 1
  14. Show more options
Tier
  1. AC/Accoflex® 13
  2. AutoFlare 7
  3. AutoSnap 2
  4. Cushion-Grip 7
  5. E Lite 4
  6. EZ Trap® 2
  7. Goliath 3
  8. Insul-Tube 5
  9. Journeyman 6
  10. Klaw 1
  11. KM 29
  12. Novent® 2
  13. TechPure 3
  14. TracPipe, CounterStrike 5
  15. UltraLite 7
  16. UPC #031 1
  17. Show more options
Tonnage
  1. 0.25-5 1
Type
  1. 0.80 oz (22.7 g) 1
  2. 2-Valve 1
  3. 90° adjustable 2
  4. 90° Flat Bend 1
  5. 90° Inside Vertical Elbow 1
  6. 90° Long Radius Bend 1
  7. 90° Outside Elbow 1
  8. Accessories 1
  9. Air sampling tube 3
  10. Alkaline 5
  11. Annunciator 1
  12. Aviation 2
  13. Bulldog 1
  14. Bypass 2
  15. Cap 1
  16. Carbon Monoxide with battery backup 1
  17. Cleanout device 1
  18. CO/Gas combination 1
  19. Coil cleaner 3
  20. Coil Cleaner/degreaser 2
  21. Compressor Lead Kit 1
  22. Compressor Terminal 1
  23. Condensate Switch - Clip 1
  24. Condensate Switch - Elbow 1
  25. Condensate Switch - Tee 1
  26. Condensate Water Trap 1
  27. Condenser Coil Cleaner 3
  28. Condenser Fan 6
  29. Cork tape 1
  30. Cross Trap 1
  31. Cut Resistant 2
  32. Deluxe Terminal Kit 1
  33. Diagonal Cutting Pliers 1
  34. Does Not Apply 2
  35. Double Male-Female Adapter (FLAT) 1
  36. Double Male-Female Adapter (PIGGYBACK) 1
  37. Duct End 1
  38. Duct Smoke Detector 1
  39. Duct Tape 3
  40. Easy Clean Wipes 1
  41. Electrical Cleaning 1
  42. Equipment Pads and Mounts 1
  43. Evaporator Fan 10
  44. Fan 5
  45. Fan Cycling 3
  46. Floor 11
  47. Flushing Solvent 1
  48. Flushing Solvent Kit 1
  49. Foil Tape 1
  50. Gas connector valve 2
  51. Gear Bag 1
  52. Hand cleanser towels 1
  53. HCFC 2
  54. Heat absorbent paste 1
  55. HFC 1
  56. High Pressure 2
  57. High Quality Towels 1
  58. Hose Clamp 3
  59. HVAC Nylon Tie Tensioning Tools 1
  60. IAQ 6
  61. Insulation Tape 1
  62. Leak Detector 2
  63. Lightweight Concrete Equipment Pad 7
  64. Line Set Cover 2
  65. Liquid Sealant 3
  66. Locking Cap 2
  67. Locking Cap With Key 1
  68. Long Nose Side Cutting Pliers 2
  69. Low Pressure 2
  70. Male-Male gas connector 3
  71. Manual Reset 1
  72. Media Air Cleaner 6
  73. Metal Aerosol Can 1
  74. Metallized coated cloth backing, rubber adhesive 1
  75. Motor Mount Kit 1
  76. Multi Key 1
  77. Naphthenic Mineral Oil 1
  78. Non-Fusible 1
  79. Non-Metallic 2
  80. Nut Drivers 15
  81. Nylon Fully Insulated Female Disconnect 3
  82. Nylon Insulated Block Spade Terminal 4
  83. Nylon Insulated Butt Connector 3
  84. Nylon Insulated Closed End Connectors 2
  85. Nylon Insulated Female Flag Quick Disconnect 1
  86. Nylon Insulated Heavy Duty Ring Terminal 1
  87. Nylon Insulated Multi-Stack Disconnects 2
  88. Nylon Insulated Quick Disconnect: Female 5
  89. Nylon Insulated Quick Disconnect: Male 2
  90. Nylon Insulated Ring Terminal 1
  91. Offset 2
  92. OPSB 4
  93. P502-C Series 4
  94. P503-C Series 7
  95. P504-H Series 4
  96. Paraffinic Mineral Oil 2
  97. Pesticide 1
  98. Piercing Saddle Valve 1
  99. Pipes 5
  100. Plastic Bottle 2
  101. Plastic Equipment Pad 3
  102. Pleated 8
  103. Plug in Damper 5
  104. Polyethylene Coated Cloth Duct Tape with Natural Rubber Adhesive 2
  105. Premium Foil Tape 1
  106. Pro Series 9
  107. PVC Cement 1
  108. Rainshield Kit 1
  109. Ratchet 1
  110. Remote Test Station 2
  111. Replacement blade 1
  112. Return Air 9
  113. Round Automatic Zone Damper 6
  114. Run Capacitor (Dual) 46
  115. Run Capacitor (Single) 7
  116. Screwdrivers 4
  117. Sequencing or Switching 1
  118. Shop Towels 2
  119. Sidewall and Ceiling 24
  120. Silicone Sealant 4
  121. Snip 7
  122. Soffit Fitting 1
  123. Solderless 1
  124. Static Pressure Regulating Damper 4
  125. Terminal Kit with Tool 1
  126. Thermostat 7
  127. Torsion Flex Bracket 1
  128. Total system protection 1
  129. TrueZONE® Bypass Constant Pressure Regulating Damper 3
  130. Twist-On Wire Connector Kit 1
  131. Union Coupling 1
  132. Wall Penetration Cover 1
  133. Winged 1
  134. Wire connector 5
  135. Wireless Control 1
  136. Workman Series 3
  137. Wrenches 5
  138. Show more options
Voltage
  1. 1.5 VDC 4
  2. 110 VAC 1
  3. 110/220 VAC 1
  4. 115 VAC 10
  5. 12 VDC 5
  6. 12-240 VAC/VDC 8
  7. 120 VAC 5
  8. 120/240 VAC 3
  9. 16-33 VDC 1
  10. 18-30 VAC 4
  11. 18-32 VAC 1
  12. 20-29 VDC 2
  13. 20-30 VAC 10
  14. 208-230 VAC 26
  15. 208-230/460 VAC 1
  16. 208-240 VAC 1
  17. 230 VAC 1
  18. 230/460 VAC 3
  19. 24 VAC 62
  20. 24/208-240 VAC 2
  21. 370/440 VAC 53
  22. 600 VAC 3
  23. 9 VDC 2
  24. 90-277 VAC 2
  25. Show more options
Wall Thickness
  1. 1" 3
  2. 1/2" 9
  3. 3/4" 3
  4. 3/8" 3
Watts
  1. 6 3
  2. 75 1
  3. 93 1
  1. System Sensor - RTS2-AOS Multi-Signaling Accessory with Strobe for Duct Smoke Detectors
    System Sensor - RTS2-AOS Multi-Signaling Accessory with Strobe for Duct Smoke Detectors
    Item: SS-RTS2-AOS
    MFR: RTS2-AOS
    What’s the price?
    Sign in for pricing.
  2. System Sensor - D4120 4-Wire Photoelectric Duct Smoke Detector
    System Sensor - D4120 4-Wire Photoelectric Duct Smoke Detector
    Item: SS-D4120
    MFR: D4120
    What’s the price?
    Sign in for pricing.
  3. System Sensor - DST5 - 5' Sampling Tube
    System Sensor - DST5 - 5' Sampling Tube
    Item: SS-DST5
    MFR: DST5
    What’s the price?
    Sign in for pricing.
  4. System Sensor - DST1.5  1.5' Sampling Tube
    System Sensor - DST1.5 1.5' Sampling Tube
    Item: SS-DST1.5
    MFR: DST1.5
    What’s the price?
    Sign in for pricing.
  5. Multi-Signaling Accessory For Duct Smoke Detectors
    Multi-Signaling Accessory For Duct Smoke Detectors
    Item: SS-RTS2
    MFR: RTS2
    What’s the price?
    Sign in for pricing.
  6. System Sensor - DST3 3' Sampling Tube
    System Sensor - DST3 3' Sampling Tube
    Item: SS-DST3
    MFR: DST3
    What’s the price?
    Sign in for pricing.
  7. System Sensor - APA151  Remote Annunciator w/ Piezo Alarm
    System Sensor - APA151 Remote Annunciator w/ Piezo Alarm
    Item: SS-APA151
    MFR: APA151
    What’s the price?
    Sign in for pricing.
  8. Fieldpiece Instruments - AVG2 - Vacuum Gauge Head
    Fieldpiece Instruments - AVG2 - Vacuum Gauge Head
    Item: AVG2
    MFR: AVG2
    What’s the price?
    Sign in for pricing.
  9. Fieldpiece Instruments - LT17AW - DMM, Wireless
    Fieldpiece Instruments - LT17AW - DMM, Wireless
    Item: LT17AW
    MFR: LT17AW
    What’s the price?
    Sign in for pricing.
  10. Fieldpiece Instruments - ATWB1 - Wet Bulb W/Alligator
    Fieldpiece Instruments - ATWB1 - Wet Bulb W/Alligator
    Item: ATWB1
    MFR: ATWB1
    What’s the price?
    Sign in for pricing.
  11. Fieldpiece Instruments - ADK7 - Silicone Lead Kit (ADLS2, ASA2, RCT2)
    Fieldpiece Instruments - ADK7 - Silicone Lead Kit (ADLS2, ASA2, RCT2)
    Item: ADK7
    MFR: ADK7
    What’s the price?
    Sign in for pricing.
  12. Fieldpiece Instruments - LT17A - DMM,Temp,Mfd,B/L
    Fieldpiece Instruments - LT17A - DMM,Temp,Mfd,B/L
    Item: LT17A
    MFR: LT17A
    What’s the price?
    Sign in for pricing.
  13. Fieldpiece Instruments - SOX3 - Combchk W/Autopump
    Fieldpiece Instruments - SOX3 - Combchk W/Autopump
    Item: sox3
    MFR: SOX3
    What’s the price?
    Sign in for pricing.
  14. Fieldpiece Instruments - ATB1 - Bead Tip
    Fieldpiece Instruments - ATB1 - Bead Tip
    Item: ATB1
    MFR: ATB1
    What’s the price?
    Sign in for pricing.
  15. Fieldpiece Instruments - SPDM1 - Pocket Dmm W/Leads
    Fieldpiece Instruments - SPDM1 - Pocket Dmm W/Leads
    Item: SPDM1
    MFR: SPDM1
    What’s the price?
    Sign in for pricing.
  16. Fieldpiece Instruments - SRH3 - Induct Teet, Sh, Wb, %Rh
    Fieldpiece Instruments - SRH3 - Induct Teet, Sh, Wb, %Rh
    Item: SRH3
    MFR: SRH3
    What’s the price?
    Sign in for pricing.
  17. Fieldpiece Instruments - ARH5 - InDuct, Psychrometer Head
    Fieldpiece Instruments - ARH5 - InDuct, Psychrometer Head
    Item: ARH5
    MFR: ARH5
    What’s the price?
    Sign in for pricing.
  18. Fieldpiece Instruments - ARH4 - Psycrometer Head
    Fieldpiece Instruments - ARH4 - Psycrometer Head
    Item: ARH4
    MFR: ARH4
    What’s the price?
    Sign in for pricing.
  19. Fieldpiece Instruments - EH4W - Wireless Handle(W/ET2W)
    Fieldpiece Instruments - EH4W - Wireless Handle(W/ET2W)
    Item: EH4W
    MFR: EH4W
    What’s the price?
    Sign in for pricing.
  20. Malco  - 12F - 12" Folding Tool
    Malco - 12F - 12" Folding Tool
    Item: 12F
    MFR: 12F
    What’s the price?
    Sign in for pricing.
  21. Malco  - 4KH8 - Reciprocating Saw Blade for Wood
    Malco - 4KH8 - Reciprocating Saw Blade for Wood
    Item: 4KH8
    MFR: 4KH8
    What’s the price?
    Sign in for pricing.
  22. Malco  - M14A - Andy 14" (36 cm)  (Classic Style)
    Malco - M14A - Andy 14" (36 cm) (Classic Style)
    Item: M14A
    MFR: M14A
    What’s the price?
    Sign in for pricing.
  23. Malco - HC2 Gold Standard Hole Cutter
    Malco - HC2 Gold Standard Hole Cutter
    Item: HC2
    MFR: HC2
    What’s the price?
    Sign in for pricing.
  24. Malco  - AV1 - Left Cut Aviation Snips
    Malco - AV1 - Left Cut Aviation Snips
    Item: AV1
    MFR: AV1
    What’s the price?
    Sign in for pricing.
  25. Malco  - W19 - Small Pocket Key Set
    Malco - W19 - Small Pocket Key Set
    Item: W19
    MFR: W19
    What’s the price?
    Sign in for pricing.
  26. Malco  - MSHL516 - Magnetic Hex Chuck Driver - Long
    Malco - MSHL516 - Magnetic Hex Chuck Driver - Long
    Item: MSHL5/16
    MFR: MSHL516
    What’s the price?
    Sign in for pricing.
  27. Malco - TS1  TurboShear™
    Malco - TS1 TurboShear™
    Item: TS1
    MFR: TS1
    What’s the price?
    Sign in for pricing.
  28. Malco  - S3R - 3" Offset Hand Seamer
    Malco - S3R - 3" Offset Hand Seamer
    Item: S3R
    MFR: S3R
    What’s the price?
    Sign in for pricing.