SS610E is specially designed for use in Mini Split systems. Its small Sensor can easily fit in the confined internal spaces of most units. It can also be installed directly in the Drain Pan or clipped to the unit's Coils. SS610E's CPU unit is housed in an attractive casing that can be mounted directly to the side of the unit. Uses power from A/C unit so no batteries are required.
The Electronic Condensate Overflow Switch contains low power consuming, state-of the- art microelectronics. SS610E's logic circuit continuously samples the probes for water. If water is detected, the circuit determines if the condition is transient or permanent. If permanent, the system will be shutdown. Onboard LED's indicate the condition of the unit.
1.16 Pounds (lbs)
2.25 Inches (In)
8.125 Inches (In)
Country of Origin
5.5 Inches (In)
Designed for mini split systems, for installation directly on primary drain pan or clipped to coils above primary drain pan. Multi-voltage. Can be wired in both normally opened and normally closed systems.
UL 508 listed
2' lead, probe 4'
For Use With
Mini split systems
Condensate Overflow Cut Off Switch
0 to 250 Volts AC, 5A, 1250VA; 0 to 30 Volts DC, 5A, 150W
Maximum Amps Running
Primary Drain Pan or Clipped to Coil Above Primary Drain Pan