Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

Payne® - 2.5 Ton 14 SEER 60000 Btuh Residential Packaged Gas Heat & Electric Cooling Unit

Item: PY4GNAE30060--TP

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info


PY4G = Single Packaged Air Conditioner and Gas Furnace System / Type of Unit
N = 208/230-1-60 / Electrical Supply
A = N/A
E = Major Series
30 = 2.5 Tons / Nominal Cooling Capacity
060 = 60,000 / Heat Input Size (Btuh)
TP = Base unit with tin plated indoor coil hairpins

Single-Packaged Products with Energy-Saving Features and R-410A refrigerant.
  • 14.0 SEER
  • 11.5 EER
  • 81.0% AFUE (Single phase models)
  • ECM Motor-Standard
  • Direct Spark Ignition
  • Low Sound Levels
  • Dehumidification Feature
  • Cabinet air leakage of 2.0% or less at .5 in. W.C. when tested in accordance with ASHRAE standard 193. (Low leak FIOP models only.)
One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance.
Easy Installation
Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating / cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER (Seasonal Energy Efficiency Ratios) of 14.0, 11.5 EER, and AFUE (Annual Fuel Utilization Efficiency) ratings up to 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
Turbo-tubular™ heat exchangers are constructed of aluminized steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory.
Warning: this product contains a chemical known to the State of California to cause cancer.


Weight320 Pounds (lbs)
Width48.1875 Inches (In)
Height45.75 Inches (In)
Country of OriginMEX
Length32.625 Inches (In)
Blower Motor HP1/2 HP
Blower Motor RPM1050
Blower Motor SpeedsVariable
Blower Motor TypeECM (Electronically Commutated Motor)
Blower Wheel10" x 10"
BTU Input60000
BTU Output49000
Circuit Breaker - Max Amps30
Circuit Breaker - Min Amps21.5
CompressorHermetic Scroll
Condenser Motor HP1/10 HP
Condenser Motor RPM810
Condenser Motor Speeds1 (Single)
Condenser Motor TypeDirect Drive
Cooling Capacity28600
Cooling Rated Capacity Btu/h30000
Cycle/Hertz60 Hz
Drain Connection Size3/4"
Drive TypeDirect
Energy Star RatedNo
ETL ListedNo
Filter Size(2) 20" x 12" x 1"
Fuel TypeNatural Gas
Gas ConnectionNPT
Heating Capacity49000-60000
Ignition TypeDirect Spark (DSI)
Locked Rotor Amps72.5
Product FamilyPY4G
Prop 65Yes
Rated Load Amps13.5
Sound Level (dBA)72
Thermal Efficiency81
UL ListedYes
Voltage208-230 VAC



Equipment Part List